Making a "vide poche" table takes some hand work. That is part of the reason I like to do them. My work is about having my hand be involved in the process and distinguishing what I do form factory made items.
Here is the process for carving a leg for the vide poche table. Above is the nearly finished leg sanded to 150 grit. It will get a final sanding to 220 and then the "finishing" process starts. I hope to show my finish and metal leaf process next. These photos are in reverse order, because I am not technically proficient enough to figure out how to change them. The whole process takes about 10 - 15 minutes per leg.
These are the tools of the "trade" for my carving the legs. Straight chisels, rasps, riffler rasps, sculpting rasps and sandpaper 80-220 grits.
This stage is after the finish rasping and the shape is almost there.
The legs has been rasped with the sculptural rasps to a very close approxiamtion of final shape. It is important to not take off too much to allow for finish rasping and sanding.
This is what the leg looks like after the chisel work. It still needs alot of refining but the basics are there.
This is as far as a machine can take it. At this stage, it has been turned, band-sawed excess and a bit of machine sanding to get the blank to a stage where it can be worked on by hand.